Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 25)

2–4 Initial System Setup
Publication 2711-6.2
System Components for PanelView with DH+ Port
•
DH+ PanelView Terminal
•
Personal Computer with installed:
– PanelBuilder Software
– 6200 Series Programming Software
•
PLC-5 Controller
•
One Communication Cable (Catalog No. 1770-CD), equivalent to
a Belden 9463 cable.
•
One RS-232 Communication Cable (Catalog No.
2711-NC13,-NC14 or 2706-NC13)
Node 0
Personal Computer
PanelBuilder
Node 1
PLC-5 Controller
Cable
Catalog No. 2711-NC13,
2711-NC14, 2706-NC13
Node 2
PanelView 900 DH+ Terminal Shown
DH+ Port
3-Pin Terminal Block Connector
RS-232 Port
Serial Port
COM1 or COM2
PLC DH+ Port
82 W or 150 W
resistor
Blue
Shield
Clear
2
SH
1
1
2
SH
Clear
Shield
Blue
2 1