Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 24)

2–3 Initial System Setup
Publication 2711-6.2
System Components for PanelView with Remote I/O Port
•
Remote I/O PanelView Terminal
•
Personal Computer with installed:
– PanelBuilder Software
– 6200 Series Programming Software
•
PLC-5 Controller
•
One RIO Communication Cable (Catalog No. 1770-CD),
equivalent to a Belden 9463 cable. Along with two RIO
connectors, one RIO connector is provided with the terminal.
•
One RS-232 Communication Cable (Catalog No.
2711-NC13,-NC14 or 2706-NC13)
Node 0
Personal Computer
PanelBuilder
Node 1
PLC-5 Controller
Cable
Catalog No. 1770-CD
(Belden 9463)
Cable
Catalog No. 2711-NC13,
2711-NC14, 2706-NC13
Node 2
PanelView 900 Remote I/O Terminal Shown
Remote I/O Port
3-Pin Terminal Block Connector RS-232 Port
Serial Port
COM1 or COM2
PLC RIO Port