Rockwell Automation 2711 PanelBuilder Software Getting Started User Manual
Page 92
![background image](/manuals/580220/92/background.png)
7–3
Validating and Downloading the Application
Publication 2711-6.2
To download an application using the Internal DH485 Driver:
➁ Choose Download from the Application menu.
➂ Select the Download parameters.
➃ Application is validated and translated to a .PVA file.
➄ PanelBuilder software and terminal display status of download.
➀ Open the application you want to download.
Enter name of .PVA file in which to
save the translated .PBA file or click
Browse to search for a file.
Check this box to download the application only if it is
different from the application loaded in the terminal.
Select Operator Terminal
Select Internal DH485 Driver
Click OK to start
download.
gtstart.pva
If errors or warnings are detected, the Exceptions dialog
opens. You must correct errors before download can
proceed. Warnings should be corrected, but the
download will proceed.
➅ Terminal resets, verifies and displays the startup screen of the application.
Node address of
terminal on network
Node address of
computer on network
Address of highest
node on network
Baud rate of
DH-485 network
Name of DH-485
network
COM port using Internal
DH485 driver
For DH-485 or RS-232 (DH-485) terminals,
click Setup to verify network parameters.