Rockwell Automation 7712 OneGear Motor Control Center FVNR Starter (7.2 kV) - Manual (Page 11)

Transportation and Handling 3-3
7712-IN001B-EN-P – June 2013
Rod or Pipe Rollers
This method is only suitable when there are no inclines and the controller
is being moved on level fl oor.
Boards 50 mm X 152 mm (2” x 6”) or equivalent and at least 300 mm
longer than the controller must be placed under the shipping skid, as shown
in Figure 3.2.
Carefully ease the shipping skid over the rollers until the equipment weight
is borne on the rollers.
The controller can be rolled to its desired location. Steady the load to prevent
tipping.
Figure 3.2 – Rod or Pipe Rollers
Minimum 50 mm x 152 mm (2 in. x 6 in.)