Rockwell Automation 7712 OneGear Motor Control Center FVNR Starter (7.2 kV) - Manual (Page 19)

Equipment Installation 4-7
7712-IN001B-EN-P – June 2013
Figure 4.10 – Barrier Assembly with Contactor Cart Removed
Remove bolt that is retaining the barrier assembly between contactor cell
and load terminal cell.
Figure 4.11 – Removing Barrier Assembly Bolt
Pull aside gasket from the front of the cabinet fl ange to enable removal of
barrier.
Bolt Securing
Barrier Assembly
4.4 Removal of Inter
Compartment Barrier