Rockwell Automation 7712 OneGear Motor Control Center FVNR Starter (7.2 kV) - Manual (Page 49)

Appendix
A
Torque Values for Hardware
7712-IN001B-EN-P – March 2013
Hardware
Recommended Torque
N· m Lb.ft.
M6 6.0 4.4
M8 14.0 11.0
M10 29.0 21.0
M12 50.0 37.0
M16 124.0 91.0
The following table contains the recommended torquing values for hardware
required to fasten electrical connections (bus-bus or bus-fl exible bus links).