Rockwell Automation 7712 OneGear Motor Control Center FVNR Starter (7.2 kV) - Manual (Page 37)

Equipment Installation 4-25
7712-IN001B-EN-P – June 2013
Upon completion of 4.10, the whole starter must now be placed back
together as it originally was.
1) Re-install the Barrier Assembly from step 4.1.4.
2) Re-install the contactor cart from step 4.1.3.
3) Re-close the MV door from step 4.1.2.
W A R N I N G W A R N I N G
Failure to re-install all components to their original
functional state may lead to personal injury or death,
property damage, or economic loss.
4.11 Placing the Contactor
Back into the Starter