Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option - Manual (Page 17)

Chapter 3
Installing the BLISTER–PAK Option
3–2
Figure 3.1
Using the Installation RAM card
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
CVIM Module
Card Label Metal Strip
BLISTER-PAK
Installation Card
3. Apply power to the Color CVIM module to start the loading sequence.
!
ATTENTION: Do Not remove power to the Color CVIM
module during loading of the BLISTER-PAK option. Doing so
may damage the Color CVIM module.
During the loading process, the Pass/Fail LED alternates between orange
and green.
When the loading process is complete, the CVIM module begins its
normal powerup sequence.
4. Verify that the BLISTER-PAK option is installed by checking the title
banner on the monitor after powerup. If the BLISTER-PAK option is
correctly installed, a message (similar to the one illustrated in Figure 3.2
on page 3–3) will appear on the banner indicating the presence of the
BLISTER-PAK option.