Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option - Manual (Page 44)

Chapter 6
Adjusting Blister Windows
6–2
You can toggle between Adjust One and Adjust All whenever the Adjust
menu appears on screen. Picking other menu items will not “gray” this menu
item, and picking it will not affect the other menus or menu items currently
displayed. Toggling its state has no affect on actions you have already taken.
The position function enables you to modify the size and location of blister
inspection windows. The windows affected by this function are determined
by the mode selection in the
Adjust: menu item, as follows:
•
In Adjust: One mode, you can use the position function to adjust the size
and location of currently selected window (that is, the window outlined in
red). When you pick the
Position menu item, that window appears with
pick and place “handles.”
•
In the Adjust All mode, you can use the position function to adjust all
windows simultaneously. In this case, the windows are all outlined in red.
When you pick the
Position menu item, the last–selected window appears
with pick and place “handles.” All size or position changes that you make
to that window will be applied simultaneously to the remaining windows.
NOTE: While in the Adjust: One mode you can define different tolerances,
background inspection, auto location, flipped objects, and object types for
each window, for most applications, you should use the
Define Objects
menu in the Adjust: All mode only.
From the Define Objects menu you can provide the system with important
information about your blister application. When you click on the Define
Objects item, the Define Objects menu appears, as shown in Figure 6.2.
Figure 6.2
Selecting Define Objects Menu
Position Window
Define Objects