Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option User Manual
Page 28
Chapter 5
Auto Setup
5–8
3. Using the
Define Objects
menu item,
a. Set flipped objects option to
Yes
or
No
. The default is
No
. (For
details about this option, refer to the Flipped Objects section on
page 6–3 of Chapter 6.)
NOTE: If your application involves two–color objects that are
randomly “flipped”; that is, tablets with either side (color) facing
the camera, or capsules with either end (color) pointed in a
particular direction, you must toggle
Flipped Objects:
to
Yes
before starting the teach–in. Otherwise, the application will
produce numerous errors in the run mode.
b. Set the automatic object location option to
Enable
or
Disable
. The
default is
Enable
. (For details about this option, refer to the Auto
Locate section on page 6–4 of Chapter 6.)
c. Set the background inspection option to
Enabled
or
Disabled
. The
default is
Disabled
.
NOTE: If you select
Enabled
, you should also select the
Filter
,
Min BG Area
, and
Extra Area
% parameters at this point. (For
details about those options, refer to the Define Background section
on page 6–4 of Chapter 6.)
At this point, you can continue with the auto setup process described in the
following section.