Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option - Manual (Page 62)

Chapter
8
Chapter 8
Results and Outputs
Figure 8Table 8
8–1
Results and Outputs
This chapter includes information about the following subjects:
•
Results of the object verification window operation, including new results
codes and the availability of Win1.9 for use by the Color CVIM
MATH-PAK
t option (Cat. No. 5370–CMPK).
•
The Active: Pass function versus the Active: Fail function.
•
The Machine Stop output function.
•
The Results Trigger function.
Note: This chapter describes only the differences between the standard Color
CVIM system and the Color CVIM BLISTER-PAK implementation. For
complete information on Color CVIM system results and outputs, refer to
Chapters 11 and 13 of the Color CVIM User’s Reference Manual (Cat. No.
5370-ND009) and the Color CVIM Communications Manual (Cat. No.
5370-ND010).
The object verification window inspection operation verifies that a “learned”
set of tablets, capsules, or other objects is present and is acceptably
positioned within a window. The system reports the outcome of each object
verification inspection –– the results –– in the same way that it does with
other Color CVIM inspection and image analysis tools. Those results can be
used for statistical analysis or for further processing or control activities.
Many Color CVIM users have found the Color CVIM MATH-PAK option
and Color CVIM USER-PAK
t option (Cat. No. 5370–CUPK) especially
useful in performing post-inspection processing. The BLISTER-PAK version
of the Color CVIM system provides seamless integration with both options.
Using Inspection Results in Color CVIM MATH-PAK Formulas
With the MATH-PAK option, you can use your Color CVIM system to
perform mathematical and/or logical operations, using formulas that you
specify, on results data from any of the Color CVIM module’s analysis tools.
Your inspection application can use results data from these operations instead
of, or in addition to, results data from individual analysis tools. The results
from object verification blister inspection are compatible with the
MATH-PAK option, and are available directly for use with it.
!
ATTENTION: When using Color CVIM MATH–PAK
formulas, numerical results and discrete outputs normally used
for blister inspection windows can be replaced by the results of
formulas. Refer to Chapter 4 in the Color CVIM MATH–PAK
Option User’s Manual, Cat. No. 5370–ND016, for details.
Results of Object Verification