Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option User Manual
Page 39
Chapter 5
Auto Setup
5–19
To delete a window, pick the center handle of the window to select it, then
pick the
Delete
menu item. At that point, the following warning message
will appear:
WARNING: This will delete the active window.
Reselect to confirm.
Pick the
Delete
menu item again to delete the window (or pick another menu
item to cancel the delete operation).
To add a window, select an existing window (the new window will duplicate
the selected window) and pick the
Add
menu item. At that time, the new
window will appear near the selected window. (The maximum allowable
number of windows is 48.)
When you have verified that all required blister windows are present and are
properly sized and positioned, press
Continue
to go to the next step (or pick
Stop
to abort the auto setup process at this point).
Verify Object Counts
When you pick
Continue
, the system evaluates each blister window and
reports the number of objects that it finds in each window, as illustrated in
Figure 5.8.
Figure 5.8
Example: Verifying Object Counts for Capsules