Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option - Manual (Page 60)

Chapter 7
Runtime Options
7–3
When you click on Stats Page , the statistics page appears onscreen, as
illustrated by the example in Figure 7.4.
Figure 7.4
Example: Stats Page Display Panel for BLISTER–PAK Option
In this example, the Stats Page displays the inspection results three blister
windows following a series of inspections. The statistical data in this display
indicate the total number of blisters inspected, accepted, and rejected. The
data also indicate the counts of each defect type, which includes the
cumulative counts for each blister and the cumulative totals for all blisters.
NOTE: The system identifies all defects for each blister inspected. Thus,
the defect count totals for a particular blister may be higher than the number
of rejects for that blister. For example,
Blister 1 in Figure 7.4 shows that a
total of 20 defects were detected, but only 13 rejects occurred for this blister.
Thus, for some of the rejects for
Blister 1 , more than one defect occurred.
Stats Page Display Panel