Discrete i/o configuration, Remote i/o configuration – Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option User Manual
Page 20
![background image](/manuals/580740/20/background.png)
Chapter 4
System Configuration
4–2
Discrete I/O configuration involves mainly the assignment of various input
and output signals to discrete I/O lines. Most discrete I/O configuration
activities are performed from the
I/O
menu, which is accessed from the
Env/Cam
menu, as shown in Figure 4.2.
Figure 4.2
Selecting I/O Menu
For complete details about discrete I/O configuration, refer to Chapter 11 in
the Color CVIM Module User’s Reference Manual, Cat. No. 5370–ND009.
NOTE: The Color CVIM BLISTER-PAK option provides three new
discrete I/O features; namely, the active–pass/active–fail option, the machine
stop output signal option, and the results trigger option. These options are
discussed in detail in Chapter 8, Results and Outputs, under the
corresponding headings.
In order to use the Remote I/O port of the Color CVIM, the port must be
configured as described in Chapter 4 of the Color CVIM Communications
Manual, Cat. No. 5370–ND010.
Discrete I/O Configuration
Remote I/O Configuration