Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option - Manual (Page 35)

Chapter 5
Auto Setup
5–15
Identify Object Colors
When you pick Continue the system identifies the first (or only) object color
by automatically placing an “X” within each object of that color, as
illustrated in Figure 5.5.
Figure 5.5
Example: Identifying Object Colors
The following message appears in the message box:
Learning color 3. Select an object to mark or
unmark it. When each object of this color is
marked with an X, select Continue, or select
Stop to abort auto–setup.
As is indicated by the message box, you can perform “mid–course”
corrections at this point, if necessary. Thus, if an “X” is missing from an
object that should have one, or is present in an object when it should not be,
you can pick the object to either add or remove the “X.” Note that you can
mark or un–mark only those objects that are within the image window, and
for which there is a corresponding “hole” in the background color.
After the “X’s” are all in their proper places, pick Continue to learn the
object color.