Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option - Manual (Page 19)

Chapter
4
Chapter 4
System Configuration
Figure 4Table 4
4–1
System Setup
Use this chapter as a guide as you first set up your basic system to meet the
needs of your own unique inspection environment. It includes information on
topics such as camera installation, discrete I/O, and communications issues.
The initial configuration of your blister inspection system resembles that
used for a standard Color CVIM module. We have elected not to duplicate
the mass of that information here. As a result, you will be asked throughout
this chapter to refer to specific sections of the documentation that came with
your Color CVIM Module. Titles referenced include:
•
Bulletin 5370 Color CVIM Module User’s Reference Manual (Cat. No.
5370-ND009).
•
Bulletin 5370 Color CVIM Module Communications Manual (Cat. No.
5370-ND010).
When you select the Setup menu item from the run mode, the module will
enter either the system setup mode (see Figure 4.1) or the blister setup mode.
To access the system setup mode while in the blister setup mode, click on the
Exit menu item.
Camera configuration involves mainly these activities: focusing the camera,
identifying the camera type, selecting the camera resolution, and optimizing
the Color CVIM system for use with the intended lighting system. Most
camera configuration activities are performed from the
Camera menu,
which is accessed from the Env/Cam menu, as shown in Figure 4.1.
Figure 4.1
Selecting Camera Menu
For complete details about camera configuration, refer to Chapter 4 in the
Color CVIM Module User’s Reference Manual, Cat. No. 5370–ND009.
Accessing System Setup
Camera Configuration