Rockwell Automation 5370-CBPK Color CVIM BLISTER-PAK Option - Manual (Page 18)

Chapter 3
Installing the BLISTER–PAK Option
3–3
Figure 3.2
Title Banner With BLISTER-PAK Option Installed
Installing the Color CVIM BLISTER-PAK option nullifies any pre-existing
installation of the USER-PAK and/or MATH-PAK options on your Color
CVIM module. If you install the BLISTER-PAK option over an existing
USER-PAK or MATH-PAK installation, you must reinstall those options.
Installation of the Color CVIM BLISTER-PAK option results in
modifications to the standard Color CVIM firmware. Those modifications
deliver a range of powerful new functionality, but also result in elimination
of some features of the Color CVIM that are unlikely to be used in an
environment where blister packaging inspection is required.
Here are the main differences between the standard Color CVIM firmware
features and the features available with the Color CVIM BLISTER-PAK
option:
•
Calibration –– The BLISTER–PAK option does not contain the
calibration feature.
•
Communications –– The BLISTER–PAK option does not support
Pyramid Integrator backplane communications.
Reinstallation of USER-PAK
and MATH-PAK Options
Compatibility With Existing
Applications