3 wiring the relay control output – Rockwell Automation VSM500 Integrated Drive/Motor User Manual
Page 36
Advertising
7-6
Installing and Operating the VSM500 Integrated Drive/Motor, Version 3.0
7.3
Wiring the Relay Control Output
A single form A relay on the terminal block can be used to indicate the unit is running
(default) or has faulted (user option) based on the setup slide switch setting. Refer to
the setup slide switch description in chapter 8.
Wire to the relay control output as shown in figure 7.6.
Figure 7.6 – Relay Control Output Wiring
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Relay Common
N.O. Relay
20
Connect to External
Device Such as PLC
Input
Advertising