Rockwell Automation VSM500 Integrated Drive/Motor - Manual (Page 40)

7-10 Installing and Operating the VSM500 Integrated Drive/Motor, Version 3.0
7.5.3 Wiring an External Speed Reference (0 to 10 VDC or 4 to 20 mA)
The terminal block provides both 0 to 10 VDC and 4 to 20 mA inputs. Use only one of
these inputs for the external speed reference. The other input must remain
unconnected.
0 to 10 VDC External Speed Reference
To use an external 0 to 10 VDC signal to set the speed reference, connect the signal
leads as shown in figure 7.10. 0 to 10 VDC = minimum speed to maximum speed.
Figure 7.10 – 0 to 10 VDC External Speed Reference Wiring
18
19
12
15
17
16
14
13
9
10
11
7
8
6
4
5
3
1
2 +
_
0 to 10 VDC
0 to 10 V Speed Reference Input
Common
20