Rockwell Automation VSM500 Integrated Drive/Motor - Manual (Page 92)

Index-2 Installing and Operating the VSM500 Integrated Drive/Motor, Version 3.0
I
Identifying your unit, 1-1 to 1-5
Input isolation transformers, installing, 4-2
Input line reactors, 4-2
Installation
AC input disconnect, 4-1
AC input power, 5-1
branch circuit protection, 4-1
check with power off, 9-1
checklist, Checklist -1
considerations, B-2
emergency stop, 6-1
grounding, 5-3
input isolation transformers, 4-2
mounting, 3-1 to 3-2
planning, 2-1 to 2-2
wire routing guidelines, 2-3
Installation record, D-1
L
LED, communications (COMM), 1-3, 1-4, 11-9
LED, reverse, 1-2, 1-4
Local operating control unit
display, 1-4
reverse LED, 1-4
Local operator control unit
communications (COMM) LED, 1-4
general information, 1-3
key descriptions, 1-4
using terminal block control, 1-3
using the operator controls, 1-3, 1-5
Low Voltage Directive compliance, F-1
M
Maintenance guidelines, 12-1
Maximum speed rotary switch
adjusting, 8-3
location, 2-1, 8-2
Minimum speed, setting, 8-9
Model number format, 1-1
Motor maintenance, 12-1
Motor rotation, changing the direction of, 9-2
Motor section
description, 1-1
replacing, E-1
Mounting dimensions, 3-2
N
NEMA frames, mounting dimensions, 3-2
O
Operating speed, setting, 10-1
Option kits, 1-5
P
Power-up start switch
adjusting, 8-6
location, 8-2
R
Relay control output
switch, 8-7
wiring, 7-6
Replacement part compatibility, 11-9
Replacement parts, 11-7
Reset control, wiring, 7-14
Reverse control
reverse disable, 8-9
wiring, 7-13
Reverse LED, 1-2, 1-4
Rotary switches
adjusting the accel / decel time using, 8-4
adjusting the maximum speed using, 8-3
S
Setup slide switch, location, 2-1
Slide switch, setup
auto restart, 8-7
minimum speed select, 8-9
parameter mode for DeviceNet option, 8-11
power-up start, 8-6
relay control output, 8-7
reverse disable, 8-9
speed reference select, 8-6
start mode select, 8-11
stop type, 8-9
torque curve, 8-8
Specifications, A-1 to A-5