Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 161)

9 • Set up alarms
9-41
•
•
•
• •
Retain alarm status
The status of alarms is retained when the application is shut down. When the application
is restarted:
 If an alarm is still active, the time begins accumulating again.
 If an alarm is still active, the number of times the alarm has been triggered is increased
by 1.
Change the alarm status displayed in the alarm status list
When the operator presses the alarm status mode button, the type of alarms shown in the
alarm status list changes as follows:
 If the current type shown is all alarms, the list changes to show active alarms only.
 If the current type shown is active alarms, the list changes to show past alarms only.
 If the current type shown is past alarms, the list changes to show all alarms.
The change affects the linked or selected alarm status list only, not all alarm status lists.