Rockwell Automation FactoryTalk View Machine Edition Users Guide User Manual
Page 273
17
•
Use your application
17-15
•
•
•
• •
2. Press the Type button, or press F2 on an external keyboard to select FactoryTalk
Security User.
3. Press the Name button, or press F3 on an external keyboard. The string pop-up
keyboard opens.
Type the user name in the string pop-up keyboard, or on an external keyboard, and
then press Enter. The user name is not case sensitive.
4. Press the Password button, or press F4 on an external keyboard.
5. Type the password in the string pop-up keyboard, or on an external keyboard, and then
press Enter.
6. Press the Confirm Password button, or press F5 on an external keyboard.
Type the password again, and then press Enter.
7. Optional - Press the Advanced button, or press F6 on an external keyboard. The
Advanced Settings window opens.
Press the following buttons to adjust the advanced settings:
User must change password at next logon
The password length must meet the Password Policy, which is defined in the
FactoryTalk Security Policy. The password is case sensitive.