Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 274)

F ACTORY T ALK V IEW M ACHINE E DITION U SER ’ S G UIDE
17-16
• •
•
•
•
 User cannot change password
 Password never expires
 Account is disabled
All the settings are set to No by default.
8. To close the Advanced Settings window and complete the change, press Enter.
9. To close the Add User/Group Account window, press Cancel.
To add a Windows-linked user or group
1. Press the Add User/Group button to open the Add User/Group Account dialog box.
2. Press the Type button, or press F2 on an external keyboard to select Windows-linked
User, or Windows-linked User Group,
3. Press the Name button, or press F3 on an external keyboard. The string pop-up
keyboard opens.
Type the user name in the string pop-up keyboard, or on an external keyboard, and
then press Enter to save. The user name is not case sensitive.
4. To close the Add User/Group Account window, press Cancel.
Delete a user or group
The administrator can use the Delete User/Group button to delete a FactoryTalk security
user, a Windows-linked user, or a Windows-linked group from the current running
When adding a Windows-linked user, or a Windows-linked user group, the system will
verify whether the user or group exists in the Windows domain, Windows User
Accounts. If the user or group does not exist in the Windows domain, Windows User
Accounts, it cannot be added.
On the PanelView Plus 7 and PanelView Plus 6 terminals, there is a five-minute
threshold when adding a Windows-linked user, or a Windows-linked user group.
When you add a Windows-linked user, or a Windows-linked user group for the first time,
a window prompts you to enter an authorized user name and password.
Within five minutes after a Windows-linked user, or a Windows-linked user group is
successfully added, you can add another Windows-linked user, or Windows-linked user
group without entering an authorized user name and password.
Beyond five minutes after a Windows-linked user, or a Windows-linked user group is
successfully added, a window will prompt you to enter an authorized user name and
password again before you can add another Windows-linked user, or Windows-linked
user group.