Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 457)

21 • Set up graphic objects
21-65
•
•
•
• •
To set up a diagnostics list
1. Double-click the diagnostics list.
2. In the object’s Properties dialog box, fill in the options on each tab:
 In the General tab, specify what the list looks like at run time, whether the
operator can navigate to the list using the keys on the keyboard or keypad, and
whether the cursor wraps from the bottom of the list back to the top.
 In the Common tab, specify the diagnostics list’s spatial properties, name, and
visibility.
For details about the options in the tabs, see Help.
3. When you are finished, click OK.
Set up information message displays
The information message display graphic object gives the operator run-time messages
about information that requires immediate attention.
FactoryTalk View comes with a default graphic display called [INFORMATION] that
contains an information message display object. You can use the display and object as is,
customize them, or create your own.