Route messages, Show and print diagnostics messages at run time, Use the diagnostics list setup editor – Rockwell Automation FactoryTalk View Machine Edition Users Guide User Manual
Page 170: Or panelview plus ce terminal -8, Show and print diagnostics messages at run time -8, Use the diagnostics list setup editor -8
F
ACTORY
T
ALK
V
IEW
M
ACHINE
E
DITION
U
SER
’
S
G
UIDE
10-8
• •
•
•
•
You can also specify that messages remain in the local log file for a period of time after
they have been exported to the ODBC-compliant database. This is useful in the event of a
network failure, or any other reason that causes the database to be unavailable. In this
case, the messages remain in the local log file until the buffer time expires. If the ODBC-
compliant database becomes available during that time, the buffered messages are then
exported to the database.
Route messages
For each destination you set up, you can specify how messages are routed.
To route messages, specify:
The types of messages to log.
The audiences to send the messages to.
Whether to accept messages from Windows CE devices.
For information about who receives which types of messages, see page 10-4.
Receive messages from a PanelView Plus 7, PanelView Plus 6,
PanelView Plus, or PanelView Plus CE terminal
You can set up FactoryTalk Diagnostics to receive messages that are generated on the
PanelView Plus 7, PanelView Plus 6, PanelView Plus, or PanelView Plus CE terminal at
run time. The terminal must be on the same network as the computer running FactoryTalk
Diagnostics.
To receive messages:
Enable the personal computer to receive the messages. For details see Help for the
Diagnostics Setup tool.
Set up the PanelView Plus 7, PanelView Plus 6, PanelView Plus, or PanelView Plus
CE terminal to send the messages.
For information about setting up a PanelView Plus 7, PanelView Plus 6, PanelView Plus,
or PanelView Plus CE terminal to log to the personal computer, see the PanelView Plus
Terminals User Manual.
Show and print diagnostics messages at run time
At run time, you can show diagnostics messages in a graphic display. You can also print
the messages.
Use the Diagnostics List Setup editor
Use the Diagnostics List Setup editor to set up when to print and show messages at run
time in FactoryTalk View ME Station.