Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 311)

19 • Use graphic displays
19-9
•
•
•
• •
To set up the grid
1. On the View menu, click Grid Settings, or right-click an empty area of the display
and then click Grid Settings.
2. Specify the color and spacing of the grid points.
3. To turn on the grid, click Show Grid.
When the Grid Settings dialog box is not open you can turn the grid on by clicking
Show Grid on the View menu.
4. To make the grid active, click Snap To Grid.
When the Grid Settings dialog box is not open you can make the grid active by
clicking Snap On on the View menu.
5. Click OK.
To make the grid passive
 In the Grid Settings dialog box, clear the Snap To Grid check box, or on the View
menu click Snap On to toggle the option off.
There is no check mark beside the menu item when it is turned off.
To turn off the grid
 In the Grid Setting dialog box, clear the Show Grid check box, or on the View menu,
click Show Grid to toggle the option off.
Zoom in and out
To magnify or reduce your view of a graphic display, use Zoom In and Zoom Out. Zoom
In magnifies objects; Zoom Out reduces magnification.
Check this box to make
the grid visible.
Check this box to make
the grid active.
Select a color for the
grid points. Set the spacing of the grid
points in pixels.