Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 233)

15-1
15
Run applications on a personal computer
This chapter describes:
 Move applications to the run-time computer.
 Start FactoryTalk View ME Station.
 Load and run applications.
 Shut down applications.
 Edit device short cuts.
 Look up contact information for technical support.
 Set up FactoryTalk Diagnostics at run time.
 Set up serial ports for KEPServer Enterprise.
 Set up RSLinx Enterprise communication drivers.
 Specify the printers to use at run time.
 Specify startup options for FactoryTalk View ME Station.
 Delete log files on the run-time computer.
 Specify the time, date, and number formats to use at run time.
 Use the DeskLock tool.
Summary of steps
Follow these steps to:
 Install the necessary hardware and software on the run-time computer.
 Transfer your Windows Server 2012, Windows 8.1, Windows 8, Windows 7,
Windows Server 2008, and Windows Vista application to the run-time computer.
 Set up options in FactoryTalk View ME Station.
For information about installing FactoryTalk View ME Station, see the FactoryTalk View
Machine Edition Installation Guide.
Install hardware and software on the run-time computer
1. If you will be printing displays, alarms, or diagnostics messages, set up printer
connections on the run-time computer.
For more information, see page 15-10.