Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 168)

F ACTORY T ALK V IEW M ACHINE E DITION U SER ’ S G UIDE
10-6
• •
•
•
•
To open the FactoryTalk Diagnostics Viewer, do one of the
following
 In FactoryTalk View Studio, from the Tools menu, select Diagnostics Viewer.
 From the Windows Start menu, select Programs > Rockwell Software >
FactoryTalk Tools > Diagnostics Viewer.
For information about setting up FactoryTalk Diagnostics to send messages to the local
log, see Help for the Diagnostics Setup tool. For additional information about setting up
and using the FactoryTalk Diagnostics Viewer, see the FactoryTalk Diagnostics Viewer
Help.
Use the Diagnostics Setup tool
Use the Diagnostics Setup tool to set up:
 Destinations and message routing on the development computer, including logging to
the local log or to an ODBC database.
 Destinations and message routing on personal computers, including run-time logging
to the local log or to an ODBC database.
 The Windows CE run-time destination to receive logged messages from.
You can also use the Diagnostics Setup tool to clear the local log file.
To open the FactoryTalk Diagnostics Setup tool, do one of the
following
 In FactoryTalk View Studio, from the Tools menu, select Diagnostics Setup.
 In the FactoryTalk View ME Station dialog box, click Terminal Settings, and then
double-click Diagnostics Setup.
For information about opening the FactoryTalk View ME Station dialog box:
 On personal computers, see page 15-3.
 On a PanelView Plus 7, PanelView Plus 6, PanelView Plus, or PanelView Plus CE
terminal, see page 16-4.