Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 587)

B • Convert PanelBuilder and PanelBuilder32 applications
B-3
•
•
•
• •
To convert a PanelBuilder application when you open FactoryTalk
View Studio
Open FactoryTalk View Stu-
dio.
3. In the New tab, in the Application name box, type a name for your converted
application, up to 32 characters long.
4. If desired, type a description of the application.
If the PanelBuilder application contains an Application Description, the Application
Description will overwrite the description you type here. You can add or change the
description later, as described on page 4-18.Specify the last language that was used to
edit the application. This will be used for the converted application.You can only
import one language for your application, even if the original application uses
multiple languages. The imported language will be the last language used to edit the
application. For information about using different languages, see Chapter 12.