Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 100)

FactoryTalk Alarms and Events System Configuration Guide
92
• •
• •
•
Step 6: Test run the display
1. On the View menu, click Test Display, or click the Test Display button (shown at
left) on the toolbar.
If there are unacknowledged alarms whose alarm condition is In Alarm, the
rectangle flashes red.
2. Right-click one of the alarms, and then click Ack All on the context menu.
Because all active alarms have been acknowledged, the rectangle changes to a
steady red.