Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 89)

7 • Set up graphic displays
• •
• •
•
81
Step 4: Change the display settings for the Alarm and Event Banner display
1. On the Edit menu, click Display Settings.
2. In the Display Settings dialog box, on the Properties tab, make the following
changes, and then click OK:
‡ Clear the Title Bar check box.
‡ Select Size to Main Window at Runtime.
‡ Select Allow Display to be Resized.
‡ Under When Resized, select Scale if it is not already selected.
The Alarm and Event Banner graphic display is always visible because it is
docked. You do not need to turn on Cache After Displaying, like you did for the
Alarm and Event Summary object. See “Change the settings of the Alarm and
Event Summary display” on page 74.