Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 110)

FactoryTalk Alarms and Events System Configuration Guide
102
• •
• •
•
Step 2: Open the Alarm and Event Summary from the Alarm and Event
Banner
1. In the Alarm and Event Banner, click the Alarm and Event Summary button
(shown at left). The Alarm and Event Summary opens, and is similar to the
following graphic display.
Step 3: Next steps
Do one of the following:
„ Monitor and interact with alarms and events as shown in the next section.
„ Set up historical logging for alarms and events using the displays and startup
macros created in this chapter and in Chapter 7, “Set up graphic displays”. See
Chapter 9, “Set up historical alarm and event logging”.