Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 140)

FactoryTalk Alarms and Events System Configuration Guide
132
• •
• •
•
To start the FactoryTalk View SE Client from within
FactoryTalk View Studio:
1. If FactoryTalk View Studio is not still open, on the Windows Start menu, point to
Programs > Rockwell Software > FactoryTalk View Enterprise, and then click
FactoryTalk View Studio.
2. In the Application Type Selection window, select Site Edition (Local) and then
click Continue.
3. In the New/Open Site Edition (Local) Application dialog box, click Cancel.
4. In FactoryTalk View Studio, on the toolbar, click the Launch SE Client button.
5. In the Launch FactoryTalk View SE Client dialog box, select Alarms and
Events Demo.cli, and then click OK.