Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 136)

FactoryTalk Alarms and Events System Configuration Guide
128
• •
• •
•
5. To close the Command Wizard, click Finish. In the Button Properties dialog
box, the command Display “Alarm and Event Viewer /CC” appears in the Press
action box.
6. Click the Up Appearance tab.
7. In the Caption box, type Run the Alarm and Event Log Viewer . Press the Enter
key after “Alarm” so that the text wraps to the next line. This is the text that will
appear on the button.
8. Click OK to save the button configuration. The finished button is drawn on the
graphic display.