Rockwell Automation FactoryTalk Alarms and Events Quick Start User Manual
Page 157
Advertising
A
•
Getting started with language switching
• •
• •
•
149
Step 2: Create a digital alarm
This section uses the FactoryTalk Tag Alarm and Event Server you created in Chapter
6, “Add a tag-based alarm server for Logix5000, PLC-5, SLC 500, or third-party
controllers”. If you haven’t yet created the server, do so before continuing.
1. In the Explorer window, expand the new Tag Server, and then double-click
Alarm and Event Setup.
2. In the Alarm Setup dialog box, click the Digital tab.
3. On the toolbar, click the New button (shown at left).
Advertising