Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 90)

FactoryTalk Alarms and Events System Configuration Guide
82
• •
• •
•
Step 5: Save the graphic display
1. On the File menu, click Save.
2. In the Save dialog box, type a name for the graphic display and then click OK.
In this example, we used Alarm and Event Banner .
3. Close the graphic display.
Create a startup macro for the Banner display
This section describes how to create a startup macro. You will use the macro when
you configure the FactoryTalk View Site Edition Client. See Chapter 8, “Monitor and
interact with alarms at run time”.
Step 1: Configure a startup macro
This startup macro docks the Banner display to the bottom of the FactoryTalk View
SE Client window.
1. In FactoryTalk View Studio, in the Explorer window, double-click Macros to
open the editor.