Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 36)

FactoryTalk Alarms and Events System Configuration Guide
28
• •
• •
•
4. In the New Tag dialog box, type a name for the digital alarm tag, and then click
OK.
In our example, we named the tag DigitalAlarm1 .
Step 4: Specify a tag for each of the digital alarm’s operands,
or just enter 0
1. Inside the alarm instruction, select the ProgAck operand.
2. On the File menu, click New Component, and then click Tag.
3. In the New Tag dialog box, type a name for the tag, select BOOL as the data type,
and then click OK.
In our example, we named the tag DigitalAlarm1_Ack . For details about using the
New Tag dialog box, click Help.