Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 159)

A • Getting started with language switching
• •
• •
•
151
5. In the Input Tag field, type system\Second . This tag uses the second count from
the computer’s internal clock to trigger the alarm. You can also click the Browse
button beside the Input Tag field to select the system\Second tag and then click
OK.
6. In the Digital Alarm Properties dialog box, in the Condition list, select
Input = 0 . This triggers the alarm every time the value of the system\Second tag is
0 — which happens every minute.
7. In the Message field, type Tank Temperature is High , and then click OK.
8. Close the Alarm and Event Setup editor and save your changes.