Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 135)

9 • Set up historical alarm and event logging
• •
• •
•
127
Step 3: Configure the button commands
1. Click the browse button to the right of the Press action field, to open the
Command Wizard.
2. In the Command Categories pane on the left, expand Graphics > Graphic
Displays > Navigation.
3. In the list of commands on the right, click Display, and then click Next.
4. In the File list, select the name of the graphic display that is to open when the
button is clicked.
In this example, we want the button to start the Alarm and Event Log Viewer, so
we select
Alarm and Event Log Viewer .