Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 128)

FactoryTalk Alarms and Events System Configuration Guide
120
• •
• •
•
3. In the New/Open Site Edition (Local) Application dialog box, click the
Existing tab, and then select the My Local Site application that you created in
Chapter 4, “Add a device server for Logix5000, PLC-5, or SLC 500 controllers”.
Step 2: Configure the alarm server
1. In the Explorer window, expand the application tree until each alarm server is
visible.
2. Right-click the alarm server named FTAE Server that you created in Chapter 4,
“Add a device server for Logix5000, PLC-5, or SLC 500 controllers”. On the
context menu, click Properties.