Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 38)

FactoryTalk Alarms and Events System Configuration Guide
30
• •
• •
•
Step 6: Download the program containing the ladder logic to the controller
1. If it is not already running, start RSLinx Classic to establish communications
between RSLogix 5000 v. 16, or later, and the controller.
2. On the RSLogix 5000 menu, click Communications > Who Active.
3. If it is not already highlighted, select the controller to which you want to
download the project.
In this example, use the same controller you configured for the
West_Plant_Controller project in “Start RSLogix 5000 and then create a new
project” on page 24.