Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 164)

FactoryTalk Alarms and Events System Configuration Guide
156
• •
• •
•
9. Repeat the steps above to add captions to the other two buttons:
„ For the second button, the press action is Language it-IT (Italian for Italy).
„ For the second button, the caption is Italiano .
„ For the third button, the press action is Language de-DE (German for
Germany).
„ For the third button, the caption is Deutsch .
Step 4: Add an Alarm and Event Summary to the graphic display
1. On the Objects menu, point to Alarm and Event, and then click Summary (or
on the toolbar, click the Summary button, as shown at left).
2. In the graphic display, hold the left mouse button down and drag the mouse to
create a box for the Alarm and Event Summary object.
3. When you have the object the required size, release the left mouse button. The
Alarm and Event Summary object is drawn on the display.