Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 71)

6 • Add a tag-based alarm server for Logix5000, PLC-5, SLC 500, or third-party controllers
• •
• •
•
63
2. In the Communication Setup dialog box, click the Add button, and then type a
name for the new shortcut. We used FTAE_Controller.
Some options in this dialog box might be different if you are using PLC-5 or SLC
500 controllers.
The warning icon beside the OK button indicates that changing values in this
dialog box at run time can cause unexpected results. For details, see Help.
3. On the Primary tab, expand the list of networks and devices until the controller is
visible, and then click the controller. To set the path to the primary controller,
click the Apply button.
4. To save the shortcut configuration and close the Communication Setup dialog
box, click OK.