Rockwell Automation FactoryTalk Alarms and Events Quick Start User Manual
Page 44
Advertising
FactoryTalk Alarms and Events System Configuration Guide
36
• •
• •
•
Step 3: Build the function block logic
1. To add an alarm block, go to the tabs in the center right area (Favorites, Add-On,
and so on) as shown in the following illustration. Scroll to the right, and then click
the Alarms tab.
2. On the toolbar, click the ALMA button (shown at left) to add an Analog Alarm
block, as shown in the following illustration.
Advertising