Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 209)

F • Alarm time stamping
• •
• •
•
201
3. On the Status tab, time stamps appear when the alarm is triggered,
acknowledged, returns to normal, or when the alarm count is reset.
4. On the Parameters tab, these UTC time stamps are automatically transferred to
tags that you can then use in logic of your own.
For details about adding an Alarm and Event Summary object to a graphic display in
FactoryTalk View, see Chapter 7, “Set up graphic displays” or see the FactoryTalk
View Site Edition Help.