Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 117)

8 • Monitor and interact with alarms at run time
• •
• •
•
109
To enable an alarm:
1. In the Alarm and Event Summary window, do one of the following:
‡ If it is visible on the toolbar, click the Display the Alarm Status Explorer
button.
‡ If the toolbar button is not visible, right-click an alarm in the Alarm and Event
Summary event list, and then click Alarm Status on the context menu.
2. In the Alarm Status Explorer window, select the alarms you want to enable, and
then click the Enable selected alarm button.
Any alarms you enable stay in that state until you disable them again.
For details about the other features of the Alarm Status Explorer, click Help in the
dialog box.