Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 64)

FactoryTalk Alarms and Events System Configuration Guide
56
• •
• •
•
4. In the Available OPC Data Servers dialog box, select RSLinx OPC Server, and
then click OK.
5. Click OK again to close the OPC Data Server Properties dialog box.
6. Next, add a Tag Alarm and Event Server and define alarm conditions. See Chapter
6, “Add a tag-based alarm server for Logix5000, PLC-5, SLC 500, or third-party
controllers”.
When creating a Network application, select RSLinx Remote OPC Server.