Replace the state machine program – Rockwell Automation 2098 CompactLogix Indexing Motion Accelerator Toolkit Quick Start User Manual
Page 108
Advertising
108
Publication IASIMP-QS011B-EN-P — January 2009
Appendix B
PhaseManager for S-88 Users
3. Select the Edits Tags tab and scroll down to the tags shown below.
4. Click on the box to the left of PZ_GenericMachine_Auto, then right-click and select Delete.
5. Similarly, click on the box to the left of PZ_GenericMachine_Manual, then right-click and
select Delete.
Replace the State Machine Program
1. In the Project Explorer, right-click on the P00_Control program and select Properties.
2. Change the name to P00_Control_SM.
3. Click OK.
Advertising
This manual is related to the following products: