Rockwell Automation 2098 CompactLogix Indexing Motion Accelerator Toolkit Quick Start - Manual (Page 131)

Publication IASIMP-QS011B-EN-P — January 2009 131
Troubleshooting Appendix C
command associated with this status bit to execute. Your application code may differ.
Correct Idle/Running State Problem: AutoCycle.StepIndex Stops at 200
If the AutoCycle.StepIndex stops at 200, the problem is not in the sample code provided in the
application template. Perform the following steps to correct this condition.
1. Review the application code that you added for your specific machine in Appendix A of this
document.
2. Contact Rockwell Automation technical support for additional assistance.