Rockwell Automation 2098 CompactLogix Indexing Motion Accelerator Toolkit Quick Start - Manual (Page 47)

Publication IASIMP-QS011B-EN-P — January 2009 47
Motion Logix Integration Chapter 5
6. Click Browse to begin browsing to your
DeviceNet module.
7. Select the appropriate RSLinx Classic
driver and browse to your controller.
8. Under Backplane, expand the Local
1769 Bus Adapter and the 1769 Bus.
9. Expand the 1769-SDN scanner module.
10. Expand Port2 until you see the
available DeviceNet nodes.
11. Highlight Node 63, the DeviceNet
module.
12. Click OK (not shown) located at the top right of the window.
13. Click Yes for any additional prompts.
14. After the scanner’s Module Settings appear,
change the Address to ‘00’ and select the
desired network Data rate.
15. Click Apply.
16. After you receive confirmation of the changes, click Close.
Configure the DeviceNet Module
1. Open RSNetWorx for DeviceNet programming
software using the Start menu or the desktop
shortcut.